PDF Datasheet
PART NO. CODE NO. DESCRIPTION APPLICATION INSTALLATION IN HEAD INSTALLATION IN P-1650 UNIT WEIGHT (KG) INFO
REQUEST
1650 140070 Dirt Ordinary digging All pockets Yes 0.5
1650-HF 140071 Hardfaced 1-sided Abrasive soil, impact All pockets, HF-up yes, HF-up 0.5
1650-HFTC 140072 Hardfaced 2-sided All pockets Yes 0.6
1650-HFTC 140075 Hardfaced with carbide chips 1-sided Loose, abrasive soil All pockets, HF-up Yes, HF-up 0.7
1656-HFFTC 140076 Hardfaced with carbide chips 2-sided All pockets Yes 0.7
1656 140400 Tungsten carbide (round) High abrasion, frozen soil, low impact All pockets Yes 0.7
1654 140406 Tungsten carbide (flat) 0.6
1656F 140471 Tungsten carbide (flat) 0.5
8550 140100 Chisel-point Rock, compacted soil inside pocket only, rib up inside pocket only, rib up 0.5
8550-HF 140101 Hardfaced 1-sided chisel-point High abrasion, compacted soil 0.5
8556 140105 Tungsten carbide chisel-point Abrasive soil, frozen ground 0.5
1640 140540 Tungsten carbide round tooth Rock, abrasive soil, frozen ground Inside pocket only Inside pocket only 0.7
1851 140080 Bident (comb. dirt/chisel-point) Dirt All pocket, rib up Yes, rib up 0.6
1851-HF 140081 Hardfaced 1-sided bident Abrasive soil, impact 0.6
1851-HFF 140088 Hardfaced 2-sided bident 0.6
1851-HFTC 140083 Carbide chips, hardfaced on bident Loose abrasive soil (sand) 0.7
1652 140085 Gage tooth Dirt Outside pockets only, flange out Two outer pockets only, flange out 0.5
1652-HF 140086 Hardfaced gage Abrasive soil, impact 0.5
1658 140417 Carbide gage Highly abrasive soil, frozen ground 0.7
604-C 140065 Carbide rock tooth Frozen ground, rock used only in rock tooling 0.3
Ribd Rubr-Lok(r) 137601 4' length Use for installing teeth. See instructions 0.1
SH-85 137735 Soft steel hammer 1.9
1225 137750 Drift punch For removing worn teeth. See instructions 0.4
PART NO. CODE NO. DIMENSIONS APPROX. WEIGHT (KG) INFO
REQUEST
A° B (MM) C (MM)
WT-50 158115 25 127 47.62 1.1
CWT- 158125 20 133.35 50.8 1.5
50 158105 15 88.9 76.2 1.2
FA-50 157300 0 79.37 50.8 0.7
BT-100 157010 0 95.25 63.5 0.7
160 157000 Used for rock tooling only 0.3
1650 Series - 16R55 Series - 2070 Series - 35 Series - Taper-Fit - 2300/2400 Series - Core Barrel